The Motorola Droid Turbo 2 and Moto X Force are two of the most popular smartphones on the market, but they both have one major issue – their faulty LCD & digitizer frames assembly. This can result in distorted images, poor visibility in direct sunlight, and many other frustrating issues. Fortunately, replacing the LCD & digitizer frame assembly on a Motorola Droid Turbo 2 or Moto X Force is a relatively easy task that any skilled technician can complete. This guide will teach you how to replace the LCD & digitizer frame assembly on a Motorola Droid Turbo 2 or Moto X Force using step-by-step instructions.
What You’ll Need
If your Motorola Droid Turbo or Moto X Force’s LCD & Digitizer Frame Assembly is broken, you’ll need the following items to replace it. Your Motorola Droid Turbo or Moto X Force has an LCD & Digitizer Frame Assembly that has started to fail. You will need to replace it. Here is how to do it:
How To Do It
Remove the battery and SIM card tray, remove the rear case, replace screws on the LCD screen frame (note: there are five screws on the left side and four on the right), pull up on screen to remove it from the frame, replace new screen frame with newly replaced screws and reconnect screen cables, replace the old battery and SIM card tray Mobile Parts .
Tips for replacing the assembly
If your Motorola Droid Turbo or Moto X Force LCD & Digitizer Frame Assembly is starting to fail, it’s time to replace it. Here are some tips for replacing the assembly:
Disconnect the battery, remove the screws that hold the LCD in place, carefully remove the old assembly and set it aside. Replace the new assembly by following these steps in reverse. Be sure to use the same screws and adhesive if necessary.
Disassembly of the Motorola Droid Turbo 2 / Moto X Force
If your Motorola Droid Turbo 2 or Moto X Force screen is damaged, or if you want to replace the LCD & Digitizer Frame Assembly, follow these steps lcd phone parts .
Remove the back cover of your Motorola Droid Turbo 2 or Moto X Force. The battery and SIM card tray can also be removed. Remove the rear-facing camera and flash module from their respective slots. Remove the front-facing camera and sensors from the assembly. Remove the speaker assembly and home button before removing the LCD & Digitizer Frame Assembly (4 screws on each side).
Conclusion
If your Motorola Droid Turbo 2 / Moto X Force is experiencing issues with the LCD and Digitizer frame assembly, replacing it may be your best course of action. This guide will walk you through the necessary steps to replace the unit, including some tips on how to save yourself time and hassle. If you’re ready to take on this repair project, read the guide carefully before starting.
